Meanwhile heres a nice knob I knocked up earlier....
skip to main |
skip to sidebar
This is my tale of the building of my MNR Vortx. From the decision behind the choice up to the completed vehicle and beyond!
Inspiration and advice from:
Marc Norden Racing
More car building sites.
Specification.
MNR Vortx Rt kit. Chassis built to accept Ford Zetec engine.
2.0L 2003 Ford Focus ST170 coupled to the
type 9 box from the donor, Cosworth 3.92 LSD.
GSXR throttle bodies mounted on the original plastic ST170 manifold.
Wilwood 4 pot Superlight front calipers gripping 260mm disc's. M1144 pads. Sierra XR4i 10" drums.
Team Dynamics Pro Race 1.2 wheels with Toyo 888 tyres running185/60/13 front, 205/60/13 rears..
Sierra wiring harness, slimmed down and modified to suit.
535kg with 178 bhp from the motor with the TB's and free flowing exhaust by AAS Newcastle.
2.0L 2003 Ford Focus ST170 coupled to the
type 9 box from the donor, Cosworth 3.92 LSD.
GSXR throttle bodies mounted on the original plastic ST170 manifold.
Wilwood 4 pot Superlight front calipers gripping 260mm disc's. M1144 pads. Sierra XR4i 10" drums.
Team Dynamics Pro Race 1.2 wheels with Toyo 888 tyres running185/60/13 front, 205/60/13 rears..
Sierra wiring harness, slimmed down and modified to suit.
535kg with 178 bhp from the motor with the TB's and free flowing exhaust by AAS Newcastle.
Blog Archive
- November 2011 (1)
- April 2010 (1)
- February 2010 (2)
- January 2010 (1)
- November 2009 (2)
- October 2009 (3)
- August 2009 (1)
- June 2009 (1)
- May 2009 (2)
- April 2009 (3)
- March 2009 (3)
- February 2009 (1)
- January 2009 (3)
- December 2008 (4)
- November 2008 (5)
- October 2008 (1)
- September 2008 (4)
- August 2008 (5)
- July 2008 (3)
- June 2008 (2)
- May 2008 (5)
- April 2008 (6)
- March 2008 (7)
- February 2008 (4)
- January 2008 (2)
- December 2007 (1)
- November 2007 (1)
- October 2007 (1)
- September 2007 (2)
- August 2007 (10)
- July 2007 (1)
- June 2007 (2)
- May 2007 (1)
- April 2007 (4)
- March 2007 (8)
- February 2007 (6)
Profile
- Steve R
- Durham, United Kingdom
- I was an engineer for a local automotive manufacturer. Currently unemployed... The Jago is my 3rd build after a I finished a Sylva Striker about 12 years ago and more recently the MNR Vortx.
No comments:
Post a Comment